Sharp IV-S20 User Manual

9-33
9
Shared settings
[TITLE REGIST.] TYPE(00)
ABCDEFGHIJKLMNOPQR
STUVWXYZ
0123456789
= — ()<>SP
←→DEL. END
IV-S20
The title that has been entered will be displayed in the top left corner of the
run menu screen.
F L C1ALLC2NO
VX.X
(TYPE00)IV-S20

OK
MEAS. XXXXXXms
MEAS0 CAM1 POS-DEVIATION
On the MAIN OPS MENU, move the cursor to SET-SCRN, and press the SET key.
-On the [SYSTEM SETUP] menu, move the cursor to 2 OBJECT TYPE COND
(conditions of object type) and press the SET key.
-[OBJECT TYPE COND] menu, move the cursor to 3 TITLE REGISTRATION
and press the SET key.
Indicates that object
type 00 is selected set.
TITLE REGIST. TYPE
A to Z
0 to 9
= to >
SP (space bar)
← →
DEL. (delete)
END
Setting details
These characters and symbols are used to
enter the title name.
This is used to make spaces
These are used to move the cursor
This is used to delete the character to the
right of the cursor
This key is used to return to the [TYPE.COND.]
(conditions of object type) menu.
[9] Title registration
A title for a object type number can be entered and saved when the object type number is displayed
on the screen.
[Purpose]
The title is used to make it easier to control the details of the settings for the object type.
[Title characters]
A maximum of 16 letters and symbols may be entered.
[Operation method]

Sharp IV-S20 Specifications

General

Brand	Sharp
Model	IV-S20
Category	Color Camera
Language	English