13-8
Communication
13
(5) Measurement execution functions 5, 6, 7 and 8: codes 18
(H)
, 19
(H)
, 1A
(H)
and 1B
(H)
The measurement execution functions 5 to 8 can be processed when the measurement is started
by a CCD trigger (camera 1) and is controlled by start sampled instructions. The contents of the
commands and responses are the same as those for the measurement run functions 1 to 4, except
for the processing code.
1. Measurement execution function 5 (evaluation result): code 18
(H)
The measurement for a specified object type is executed, and the data obtained is compared with
the criteria, and the evaluation result (OK/NG) is output.
- The contents of the command and response are the same as those for the measurement
execution function 1 (code 10
(H)
).
2. Measurement execution function 6 (evaluation result + measurement data, fixed): code 19
(H)
The measurement for a specified object type is executed, and the evaluation result (OK/NG) and
measurement data obtained from each measurement function are output.
- The contents of the command and response are the same as those for the measurement
execution function 2 (code 11
(H)
).
3. Measurement execution function 7 (evaluation result + measurement numerical data): code 1A
(H)
The measurement for a specified object type is executed, and the evaluation result (OK/NG) of
each measurement function and the data from a specified measurement block are output.
- The contents of the command and response are the same as those for the measurement
execution function 3 (code 12
(H)
).
Ë
Response
Output evaluation
result
Y15
...
Y1Y0
:18
:
18
SC
(H)
SC
(L)
RC
(H)
RC
(L)
Ë
Command
CR
SC
(H)
SC
(L)
CR
Object
type
Object
type
:
19
Ë Command
Object
type
SC SC CR
:
19
Output evaluation
result
Y15
Y1
...
Object
type
(H) (L)
Measure-
ment 2
Measure-
ment 1
Measure-
ment 3
Camera 1
Camera 2
Measurement 0
Camera 1
data 2
Camera 2
data 2
Measure-\
ment 0
SC
(H)
SC
(L)
CR
Data on
measure-
ment 1 2
Data on
measure-
ment 2 2
Data on
measure-
ment 3 2
Y0
(H) (L)
SC SC
1
Ë
Response
:1A
:1A
SC
(H)
SC
(L)
RC
(H)
RC
(L)
CR
Y15
Specified
block data
Y1Y0
Measure-
ment
Ë Response
Output evaluation
result
…
SC
(H)
SC
(L)
Ë Command
CR
Object
type
Object
type
Block
To Next Page
Loading...