ShopBot PRSalpha - Introduction

Section 9: PRS Alpha Control Box Wiring • May 2, 2016
© Copyright 2016 ShopBot Tools, Inc. page 9-1
Section 9. Control Box Wiring
Introduction
ShopBot highly recommends that a licensed electrician hook up the source power according to local
code and the wiring and power diagrams included with the tool.
The specic instruction for this section should follow this introduction. If the instruction is missing or
otherwise not available, please see http://www.shopbottools.com/ShopBotDocs/gantry.htm, then
“Control box mounting and wiring (standard models)” or “Control box mounting and wiring (alpha
models)”, depending on the tool ordered.