Save message history as a PDF
Save message history as CSV
11.4.4 Status inputs and outputs
Safety Designer displays information on the supported assemblies.
T
he arrows to the device symbolize the output assemblies (from the view of the control).
The arrows away from the device symbolize the input assemblies (from the view of the
control).
Double-click on an assembly to open a detailed view featuring the individual data fields.
11.5 Diagnostics using the control
You can access the CIP objects using the controller, see "A
vailable data", page 48.
TROUBLESHOOTING 11
8027909/2023-02-22 | SICK O P E R A T I N G I N S T R U C T I O N S | nanoScan3 – EtherNet/IP™
115
Subject to change without notice
To Next Page
Loading...
