SICK nanoScan3

In many cases, a mounting height of 150mm above the floor (height of the scan plane)
is suit
able.
180 mm
150 mm
S
L
Figure 25: Recommended fitting height
120 mm
150 mm
S
L
Figure 26: Recommended fitting height for inverted mounting
4.4 Integrating the equipment into the electrical control
Requirements for use
•
T
he control of the machine can be electrically influenced.
•
The connected controller and all devices responsible for safety comply with the
required performance level and the required category (for example according to
ISO13849-1).
•
Power is supplied to all electrically connected devices in accordance with SELV/
PELV (IEC60204-1).
4 PROJECT PLANNING
38
O P E R A T I N G I N S T R U C T I O N S | nanoScan3 – EtherNet/IP™ 8027909/2023-02-22 | SICK
Subject to change without notice