SICK nanoScan3

Further topics
•
"N
etwork services and ports", page 43
•
"Managing passwords", page 91
•
"Access management", page 91
2.5 Requirements for the qualification of personnel
The product must be configured, installed, connected, commissioned, and serviced by
q
ualified safety personnel only.
Project planning
You need safety expertise to implement safety functions and select suitable products
for that purpose. You need expert knowledge of the applicable standards and regula‐
tions.
Mounting, electrical installation and commissioning
Y
ou need suitable expertise and experience. You must be able to assess if the machine
is operating safely.
Configuration
Y
ou need suitable expertise and experience. You must be able to assess if the machine
is operating safely.
Operation and maintenance
Y
ou need suitable expertise and experience. You must be instructed in machine oper‐
ation by the machine operator. For maintenance, you must be able to assess if the
machine is operating safely.
2 SAFETY INFORMATION
12
O P E R A T I N G I N S T R U C T I O N S | nanoScan3 – EtherNet/IP™ 8027909/2023-02-22 | SICK
Subject to change without notice