1 About this document
1.1 Scope
Product
T
his document applies to the following products:
•
Product code: nanoScan3 – EtherNet/IP™
•
“Operating instructions” type label entry: 8027907
Document identification
Doc
ument part number:
•
This document: 8027909
•
Available language versions of this document: 8027907
You can find the current version of all documents at www.sick.com.
1.2 Target groups of these operating instructions
Some sections of these operating instructions are intended for certain target groups.
Ho
wever, the entire operating instructions are relevant for intended use of the product.
Table 1: Target groups and selected sections of these operating instructions
Target group Sections of these operating instructions
Project developers (planners, developers,
de
signers)
"Project planning", page 19
"Configuration", page 59
"Technical data", page 117
"Accessories", page 145
Installers "Mounting", page 55
Electricians "Electrical installation", page 57
Safety experts (such as CE authorized repre‐
sent
atives, compliance officers, people who
test and approve the application)
"Project planning", page 19
"Configuration", page 59
"Commissioning", page 95
"Technical data", page 117
"Checklist for initial commissioning and com‐
missioning", page 153
Operators "Operation", page 97
"T
roubleshooting", page 108
Maintenance personnel "Maintenance", page 102
"T
roubleshooting", page 108
1.3 Further information
www.sick.com
T
he following information is available via the Internet:
•
Data sheets and application examples
•
CAD files and dimensional drawings
•
Certificates (such as the EU declaration of conformity)
•
Guide for Safe Machinery. Six steps to a safe machine
•
Safety Designer (software for configuring safety solutions made by SICK AG)
1.4 Symbols and document conventions
The following symbols and conventions are used in this document:
1 A
BOUT THIS DOCUMENT
8
O P E R A T I N G I N S T R U C T I O N S | nanoScan3 – EtherNet/IP™ 8027909/2023-02-22 | SICK
Subject to change without notice