5 ELECTRICAL INSTALLATION
TRANSLATION OF THE ORIGINAL OPERATING INSTRUCTIONS| VMS6200
Subject to change without notice
5 Electrical installation
All electrical work may only be performed by qualified persons.
• Qualified persons have the specialist training, skills, and experience, as well as
knowledge of the relevant regulations and standards, to be able to perform work
assigned to them and to identify and avoid any potential dangers independently.
• Electricians have the professional training, skills and experience, and knowledge of
the relevant standards and provisions to work on electrical systems and to detect
and avoid any potential dangers independently.
DANGER!
HAZARDOUS ELECTRICAL VOLTAGE
Touching live devices can lead to death, burns or electrical shock.
▸
Electrical work may only be performed on the system by qualified specialist
personnel.
▸
Before working on electrical components, observe the five safety rules:
▸
Disconnect.
▸
Secure against being switched back on.
▸
Ensure that there is no voltage.
▸
Ground and short-circuit.
Cover or enclose live parts in the vicinity.
WARNING!
DEVICE DAMAGE IF CONNECTED INCORRECTLY
An incorrect supply voltage may result in damage to the device.
▸
Only operate the cabinet with the specified supply voltage.
▸
All connected circuits must be designed as SELV circuits (in accordance with
EN 60950 or ES1 EN 60368-1).
To Next Page
Loading...
Need help?
General
