SICK VMS6200 User Manual

FAULT DIAGNOSIS 8
71
80251340/2020-02-03|SICK
Subject to change without notice
TRANSLATION OF THE ORIGINAL OPERATING INSTRUCTIONS| VMS6200
8 Fault diagnosis
8.1 Fault indications of the components
8.1.1 Fault indication on the LMS500
Fig. 53: Status indicators on the LMS500
Legend
1 LEDs
2 7-segment display
Display Possible cause Fix the error
and off
No supply voltage or supply
voltage too low.
▸
Check the voltage supply and,
if necessary, switch it on.
lights up
Front screen slightly
contaminated (warning).
▸
Clean the front screen.
flashes at 1 Hz
Front screen contaminated
(error).
▸
Clean the front screen.
flashes at 4 Hz
System error.
▸
Note the error indicated on the
7-segment display or run
diagnostics using SOPAS.
▸
Switch off the device and turn it
on again, if necessary.
Tab. 11: LED indicator on the LMS500

SICK VMS6200 Specifications

General

Brand	SICK
Model	VMS6200
Category	Measuring Instruments
Language	English