7 MAINTENANCE AND REPAIR
TRANSLATION OF THE ORIGINAL OPERATING INSTRUCTIONS| VMS6200
Subject to change without notice
7.2 Replacing components
7.2.1 General notes
Faulty or damaged components must be dismantled and replaced with new or repaired
components.
All customer-specific parameters are saved both in the device and on the storage
medium. This makes it easy to replace components.
Component Storage medium
MSC800 microSD card
VMC800 USB stick
LMS500 System plug
DANGER!
HAZARDOUS ELECTRICAL VOLTAGE
Touching live devices can lead to death, burns or electrical shock.
▸
Electrical work may only be performed on the system by qualified specialist
personnel.
▸
Before working on electrical components, observe the five safety rules:
▸
Disconnect.
▸
Secure against being switched back on.
▸
Ensure that there is no voltage.
▸
Ground and short-circuit.
▸
Cover or enclose live parts in the vicinity.
WARNING
RISK OF DEVICE DAMAGE
▸
Disconnect the power to the volume measurement system before carrying out
maintenance work.
To Next Page
Loading...
Need help?
General
