6 COMMISSIONING
TRANSLATION OF THE ORIGINAL OPERATING INSTRUCTIONS| VMS6200
Subject to change without notice
6.7 Saving the configuration
All parameters entered in SOPAS are transferred to and executed on the connected
system controller with the Immediate download option. However, the data is only saved
temporarily in the system controller.
▸
In the menu bar of the configuration interface, click on Save permanent.
The configuration is transferred to the system controller and saved there permanently.
This configuration is loaded whenever the system controller is restarted.
▸
In the SOPAS toolbar in the project window, click on Save the project.
▸
Choose a directory and file name and then confirm.
The settings are saved on the PC in a configuration file with the format *.spr.
NOTE! The settings within this file can be loaded subsequently (if required) and
transferred to the system controller.
Saving the
configuration in non-
volatile memory
Saving the
configuration
on the PC
To Next Page
Loading...
Need help?
General
