Siemens ET 200pro - Page 113

Connection
4.11 Wiring the Electronic Module using the Connection Module
ET 200pro distributed I/O system
Operating Instructions, 03/2013, A5E00335544-08
113
Pin assignment on the CM IO 8 x M8 connection module and the 4 DO DC 24V/2.0A,
4 DO DC 24V/2.0A High Feature electronic modules
Table 4- 6 Pin assignment of CM IO 8 x M8 with 4 DO DC 24V/2.0A, 4 DO DC 24V/2.0A High
Feature
View of circular connector
Terminal
Assignment X1 to X4
1
Not assigned
-
-
3
Ground for load voltage supply 2M
4 Output signal DQ
0
: Connector X1
Output signal DQ
1
: Connector X2
Output signal DQ
2
: Connector X3
Output signal DQ
3
: Connector X4
S (shield) Functional earth (FE)
Pin assignment of CM IO 8 x M8 connection module and 8 DO DC 24V/0.5A electronic module
Table 4- 7 Pin assignment of CM IO 8 x M8 with 8 DO DC 24V/0.5A
View of circular connector
Terminal
Assignment X1 to X8
1
Not assigned
-
-
3
Ground for load voltage supply 2M
4 Output signal DQ
0
: Connector X1
Output signal DQ
1
: Connector X2
Output signal DQ
2
: Connector X3
Output signal DQ
3
: Connector X4
Output signal DQ
4
: Connector X5
Output signal DQ
5
: Connector X6
Output signal DQ
6
: Connector X7
Output signal DQ
7
: Connector X8
S (shield)
Functional earth (FE)