Siemens ET 200pro - Page 353

Digital electronic modules
14.5 Digital electronic module 4 DO DC 24V/2.0A High Feature (6ES7142-4BD00-0AB0)
ET 200pro distributed I/O system
Operating Instructions, 03/2013, A5E00335544-08
353
Technical specifications
Technical specifications
Dimensions and weight
Dimensions W x H x D (mm) 45 x 130 x 35; with bus module, without
connection module
Weight
Approx. 140 g
Digital outputs
Number of outputs
4
Support of isochronous mode
No
Cable length, unshielded
Max. 30 m
Short-circuit protection of the output
Yes, electronic, per channel
• Response threshold
Min. 2.8 A
Voltages and currents
Rated load voltage 2L+
24 V DC
• Reverse polarity protection
Yes, per module, against destruction, loads
actuated
• Short-circuit protection
Yes; per channel
Total current of the outputs
• All mounting positions up to 40 °C
6 A
• All mounting positions up to 55 °C
4 A
Current consumption
• From backplane bus
< 30 mA
• From load voltage 2L+
< 40 mA
Power loss of the module
Typ. 2.5 W
Electrical isolation
• Between channels and backplane bus
Yes
• Between backplane bus and all other circuit
elements
Yes
• Between channels and electronics power
supply
Yes
• Between channels
No
Permitted potential difference
• Between different electric circuits
75 V DC, 60 V AC
Isolation
Isolation tested 500 V DC
Status, interrupts, diagnostics
Status display
Green LED, per channel
Interrupts
• Diagnostic interrupt
Configurable