Siemens ET 200pro - Page 425

Analog electronic modules
15.7 Parameter overview for analog electronic modules
ET 200pro distributed I/O system
Operating Instructions, 03/2013, A5E00335544-08
425
"Reference temperature" parameter for 4 AI TC High Feature
The "Reference temperature" parameter can only be set if you have selected "Fixed ref.
temp." for the "Reference junction" parameter.
Temperature unit
Value range in
HW Config
Decimal
Default
Celsius
-145.0 ℃ to 155.0 ℃
-1450 to 1550
0.0 ℃
Fahrenheit
-229.0 °F to 311.0 °F
-2290 to 3110
32.0 °F
Kelvin
128.2 K to 428.2 K
1282 to 4282
273.2 K