Activation / Deactivation / Reset
5
84 | 184
Command response
Execute command
Activate
Command executed
After successful activation of a 'Zone', the event 'ALARM'' is shown on the display:
Fire Brigade requested
001 ALARM
001
!
Manual FIRE
ALARM
FSE zone 1
Zone 1
Execute
Commands
Show
Intervention text
More
Options
'ALARM' event
Acknowledging 'ALARM'
κ Press <Acknowledge>.
The ↑ alarming equipment is switched off.
Execute command
Acknowledge
Command executed
Table 2: Command response
Reset 'Zone'
1. Press <Reset>.
The 'Login/logout' window is open.
2. Enter an admissible PIN.
'Zone' is reset.
To Next Page
Loading...
