Siemens SIMATIC IPC647E User Manual

Expanding and assigning parameters to the device
6.6 Drives
SIMATIC IPC647E
Operating Instructions, 11/2018, A5E45589180-AA
103
6.6.1.3 Permissible expansion for temperature range 0 to 50 °C
You can install the following drives in the Type A drive cage at various mounting locations.
You can find information on the mounting locations under:
● Drive cage type A (Page 17)
Installation options
The following figures give you an overview of the installation options for drives.
①
Drive in removable t
ray
②
Drive type "SATA" is possible
③
SSD integrated
The maximum permitted power loss of the expansion cards amounts to 55 W.
If the device is permanently installed or mounted on telescopic rails, it must not be subjected
to vibration stress during operation. The restrictions do not apply for the use of SSD.
Ambient temperature
0 - 50 °C
Drive configuration
Mode
Non-RAID system
X
RAID1 system
X
Maximum number of drives per drive type (alternative)
(in removable tray)
Ambient temperature
0 - 50 °C
Drive cage type
Front
SATA (2.5" and 3.5" size)
2
SATA Enterprise (3.5" size)
-
SAS Enterprise (3.5" size) -

Siemens SIMATIC IPC647E Specifications

General

Brand	Siemens
Model	SIMATIC IPC647E
Category	Industrial PC
Language	English