Siemens SIMATIC IPC647E

Operating the device
5.4 Operating RAID systems
SIMATIC IPC647E
Operating Instructions, 11/2018, A5E45589180-AA
63
5.4 Operating RAID systems
5.4.1 Display of a defective drive of a RAID system
A defective drive is displayed in conjunction with RAID at the following locations:
● System status displays (Page 24) on the front of the device
● SIMATIC IPC DiagBase or SIMATIC IPC DiagMonitor monitoring software
● For onboard RAID system:
"Intel® Rapid Storage Technology", see "Monitoring the onboard RAID system with
"Intel® Rapid Storage Technology" (Page 66)".
● For hardware RAID system:
"maxView Storage Manager", see "Monitor hardware RAID system with "maxView
Storage Manager". (Page 76)".
5.4.2 RAID1 system: Installation options for drives
The two hard drives required for a RAID1 system can be installed in SIMATIC IPC647E in
the following locations.
● For onboard RAID system:
– Drive cage type A, see "Drives in drive cage type A (Page 101)"
– Drive cage type B, see "Drives in drive cage type B (Page 110)"
● For hardware RAID system:
– Drive cage type A, see "Drives in drive cage type A (Page 101)"