Operating the device
5.4 Operating RAID systems
SIMATIC IPC647E
70 Operating Instructions, 11/2018, A5E45589180-AA
5.4.4.2 Installing the hardware RAID adapter card
If you ordered a device with a RAID system, the hardware RAID adapter card is already built
in on delivery.
If you would like to subsequently operate your device as a hardware RAID system, you must
also install a hardware RAID adapter card.
Requirement
● 4 GB main memory
● T10 screwdriver
● Components for installing the hardware RAID adapter card. Your local SIEMENS contact
person will provide you with information on these components.
Capacitor block with capacitor block line
Hardware RAID adapter card
"Microsemi Adaptec SmartRAID 3151-4i ("Controller", "Host Bus Adapter")"
Adapter cable: numbered connections to drives
Adapter cable: Connection to the hardware RAID adapter card
To Next Page
Loading...
