Operating the device
5.3 Drive configurations
SIMATIC IPC647E
62 Operating Instructions, 11/2018, A5E45589180-AA
5.3 Drive configurations
5.3.1 RAID systems
5.3.1.1 RAID1 system
An RAID1 system works on the principle of "data mirroring on two drives".
In the event of a defective drive the RAID1 system can continue to work on the remaining
drive and thus achieves a high level of availability.
RAID1 system with associated software
If you have ordered a RAID1 system with pre-installed operating system, the RAID1 system
is monitored with the installed diagnostics software SIMATIC IPC DiagBase or DiagMonitor.
The following software is available to monitor the RAID1 system:
● Onboard RAID system:
Intel® Rapid Storage Technology
● Hardware RAID system:
maxView Storage Manager
See also
Drive cage type A (Page 17)
Operating onboard RAID system (Page 64)
Operating the hardware RAID system (Page 69)
To Next Page
Loading...
Need help?
General
