Device maintenance and repair
7.3 Removing and installing hardware
SIMATIC IPC647E
Operating Instructions, 11/2018, A5E45589180-AA
123
7.3.2 Replacing device fans
7.3.2.1 Remove the fan cover
Requirement
● The front door is open. Read the information under "Opening the front door (Page 61)".
● Information on the position of the fan cover of the front fan is available under "Front panel
(Page 16)".
Procedure
1. Open the front door at least at an angle of approx. 45°.
2. Grasp the recessed grip of the fan cover.
3. Open the fan cover in the direction of the arrow and remove it.
To Next Page
Loading...
