Siemens SIMATIC IPC647E User Manual

Device maintenance and repair
7.4 Installing operating system, software and drivers
SIMATIC IPC647E
Operating Instructions, 11/2018, A5E45589180-AA
139
7.4 Installing operating system, software and drivers
7.4.1 Restoring or installing the operating system
Information on restoring or reinstalling the operating system you ordered with the device can
be found in the detailed operating system description, see "Important instructions and
manuals for operating the device (Page 11)".
7.4.2 Installing software and drivers
On the supplied USB flash drive (read only), you can find the "Documentation and Drivers"
suite, using which you can install all supplied software and drivers.
Procedure
1. Connect the supplied USB flash drive.
2. Start the "Documentation and Drivers" suite from the USB flash drive by executing the
"START_DocuAndDrivers.CMD" file.
3. Install the desired software and drivers.
7.5 Configuring firmware/BIOS
You can find information on configuring firmware/BIOS and the firmware settings on delivery
in the "Firmware/BIOS description
(https://support.industry.siemens.com/cs/de/de/view/109760621/en)".
Note
If your PC no longer boots, e.g. due to a crash during a BIOS update, contact your local
SIEMENS contact person.
You can find information on "BIOS Recovery" and "ME update" under "Pin assignment of the
internal interfaces (Page 165)".

Siemens SIMATIC IPC647E Specifications

General

Brand	Siemens
Model	SIMATIC IPC647E
Category	Industrial PC
Language	English