Siemens SIMATIC IPC647E User Manual

Device maintenance and repair
7.3 Removing and installing hardware
SIMATIC IPC647E
Operating Instructions, 11/2018, A5E45589180-AA
127
Procedure
1. Remove the expansion cards, if necessary. You can find information on this under
"Installing/removing expansion cards (Page 90)".
2. Remove the battery from socket.
3. Press the new battery into the socket applying slight pressure.
4. Close the device.
5. Check the firmware settings.
See also
Hardware accessories (Page 29)

Siemens SIMATIC IPC647E Specifications

General

Brand	Siemens
Model	SIMATIC IPC647E
Category	Industrial PC
Language	English