Siemens SIMATIC IPC647E

Operating the device
5.4 Operating RAID systems
SIMATIC IPC647E
Operating Instructions, 11/2018, A5E45589180-AA
75
Configuring hardware RAID adapter card settings (Configure Controller Settings)
1. After setting up the RAID system, select "Configure Controller Settings" from the main
menu.
2. Select "Modify Controller Settings".
Check or change the values of the following firmware entries:
Firmware entry
Value
Configured Physical Drive Write Cache State
<Disabled>
Controller Cache
<Enabled>
3. Select [Submit Changes] to save your settings.
4. Select [Back to Main Menu].
5. Finish the process by pressing the <Return> key repeatedly.
6. Select [Exit Descarding Changes]: Yes