4-19
Batch
flexible
, Manual
C79000-G7076-C650-02
The operations described below are supported:
1. Creating an element:
You can interactively create practically any element. The only exceptions
here are the start and end symbols and the transition dummy situated
between them. Newly created elements can be inserted directly into the
existing recipe topology with the help of the tool bar. To do so, first select
the desired element from the tool bar, position it where you want to insert
it and then click on the mouse to confirm this (for the precise procedure,
see Page 4-10 where the user interface is described).
If the structure resulting from this insertion violates the SFC standard, it
will be corrected by the addition of the appropriate structures or
dummies.
2. Deleting an element:
In your work with a recipe you can also delete selected elements. If
deletion renders any parts of the structure superfluous (for example,
branches with only a single branch), they will be removed automatically.
An element is selected by a single click on it, and the fact that the
element has been selected is indicated by the colored background of the
element.
3. Moving an element:
Within a recipe you can move selected elements forming a syntactic unit
to their correct position.
4. Copying an element:
Within a recipe you can copy to the clipboard selected elements forming
a syntactic unit. From here you can insert them at additional locations in
the recipe or in other recipes.
Operations with
the SFC elements
Recipe creation
To Next Page
Loading...
