Siemens SINAMICS G120C DP User Manual

V
Vdc_min controller,351
Vector control,313
Sensorless,310
Vertical conveyors,332
Voltage boost,300, 304, 305, 308
Voltage input,194
W
Wire breakage,262
Wire-break monitoring,196, 340, 341
Write protection,175
Z
Ziegler Nichols,298
ZSW 1 (status word 1)",215
ZSW1 (status word 1),214, 233
ZWS3 (status word3),217
ZWST1 (status word1),236
Index
SINAMICS G120C Converters
474 Operating Instructions, 02/2023, FW V4.7 SP14, A5E34263257B AK

Siemens SINAMICS G120C DP Specifications

General

Protection Rating	IP20
Frequency Range	0 to 650 Hz
Control Modes	V/f, sensorless vector control
Communication Interfaces	PROFIBUS DP
Ambient Temperature	-10 to +50 °C (without derating), -10 to +60 °C (with derating)
Overload Capacity	150 % rated current for 60 s, 200 % rated current for 3 s
Storage Temperature	-40 to +70 °C
Relative Humidity	5% to 95% (non-condensing)
Voltage Range	200 V to 240 V (±10%), 380 V to 480 V (±10%)
Output Voltage	0 V to Supply Voltage