Siemens SINUMERIK 840C - Page 440

12.93 7 Drive Machine Data (SIMODRIVE Drive MD)
7.1.2 MSD MD (data description - SW 3)
Hysteresis monitoring 1
189
Default value Lower input limit Upper input limit Units
0001 0000 FFFF Hex
Active
at once
Input of hysteresis of threshold value 1 of address 1 to be monitored for variable relay
function 1.
Address for monitoring 2
190
Default value Lower input limit Upper input limit Units
0C06 0000 FFFF Hex
Active
at once
Input of address 2 to be monitored for variable relay function 2.
Threshold for monitoring 2
191
Default value Lower input limit Upper input limit Units
0000 0000 FFFF Hex
Active
at once
Input of threshold value 2 of address 2 to be monitored for variable relay function 2.
ON-delay monitoring 2
192
Default value Lower input limit Upper input limit Units
0 0 10.00 s
Active
at once
Input of ON-delay 2 of address 2 to be monitored for variable relay function 2.
Drop delay monitoring 2
193
Default value Lower input limit Upper input limit Units
0 0 10.00 s
Active
at once
Input of drop delay 2 of address 2 to be monitored for variable relay function 2.
Hysteresis monitoring 2
194
Default value Lower input limit Upper input limit Units
0001 0000 FFFF Hex
Active
at once
Input of hysteresis of threshold value 2 of address 2 to be monitored for variable relay
function 2.
©
Siemens AG 1992 All Rights Reserved 6FC5197- AA50 7–25
SINUMERIK 840C (IA)