Siemens SINUMERIK 840C - Page 566

04.96 7 Drive Machine Data (SIMODRIVE Drive MD)
7.3.2 Drive MD (data description)
Memory location min/max memory
1652
Default value Lower input limit Upper input limit Units
0000 0000 FFFF Hex
Active
at once
Input of address of memory location to be monitored via the min/max memory function.
Note:
This machine data is operative only if the signal number is set to 0 (see MD 1651).
Caution:
This machine data is relevant only for Siemens-internal purposes and must not be altered.
Minimum value min/max memory
1653
Default value Lower output limit Upper output limit Units
0000 0000 0000 0000 FFFF FFFF Hex
Active
at once
Output of display value of min/max memory minimum value.
Maximum value min/max memory
1654
Default value Lower output limit Upper output limit Units
0000 0000 0000 0000 FFFF FFFF Hex
Active
at once
Output of display value of min/max memory maximum value.
©
Siemens AG 1992 All Rights Reserved 6FC5197- AA50 7–151
SINUMERIK 840C (IA)