11. System configuration
Pump settings => Pump settings => Filling/Low Level =>Inputs
Step Key Display Description
Inputs
Selection of fill level switch - input type
5.3
With normally closed and normally open contacts:
• Press <down arrow key>
• Press <Select control key>
• Use <down/up arrow key> to enter the value
• Press <Save control key>
• Use<down arrow key> to select option Steady, Intermitting no LL, Intermitting LL
• Press <Select control key>
• Use <down/up arrow key> to make a selection
• Press <Save control key>
• Press <Back control key>
Inputs
Input No. LL Type
[normally open/normally closed ]
Input No. Empty
[0.00 ] AI
Empty Detection Mode
[intermitting]
Select
To Next Page
Loading...
