The Default Button 4-10
Resetting Pans 4-10
Resetting Faders 4-10
Resetting Sends 4-10
Resetting Plug-ins 4-10
Channel Functions 4-11
DAW Meters 4-11
Status Indicators 4-11
Multi-channel Metering (TDM Systems Only) 4-11
Channel Fader 4-11
Fader Grouping 4-11
Channel Solo and Cut Tile 4-12
Solo Isolate 4-12
Channel SEL Button – Track Arming/Edit/Select 4-13
Record Ready Mode 4-13
Record Safe 4-13
Working with the Channel V-pots 4-14
Setting Sends Pre/Post Fader 4-15
Muting a Send Output 4-15
Flipping Send Levels to the Faders 4-15
Input, Output and Send Routing 4-16
Viewing Input, Output and Send Routing 4-16
Setting Input, Output and Send Routing 4-16
Assigning Signals to Multiple Channels 4-16
Assigning a Channel to Multiple Outputs 4-16
Motion Control Panel 4-17
Transport Controls 4-17
Other useful transport modes 4-17
AWS Footswitch Control 4-18
Zoom, Navigation and Selection Modes 4-19
Navigation Mode (Neither Zoom nor Select lit) 4-19
Zoom Mode (Both Zoom and Select lit) 4-19
Select Mode (Both Zoom and Select Flashing) 4-19
Scrolling Within a Window 4-19
Shuttle/Scrub Wheel 4-20
Numeric Keypad 4-20
Working with Markers/Memory Locations 4-20
HUI Plug-in Control 4-21
Plug-In Editor 4-21
Plug-In Editor Display 4-21
Plug-In Editor Controls 4-21
Paging Buttons 4-21
Selecting DAW Channels to Edit 4-21
Plug-In Display Modes 4-22
Viewing Current Inserts (Insert Mode) 4-22
Assigning a Plug-In or Hardware I/O (Insert Mode) 4-22
Editing Plug-In Parameters (Parameter Mode) 4-23
Selecting a Plug-In to Edit 4-23
Changing Plug-in Parameters 4-23
Hi-Resolution Parameter Display Mode 4-23
Comparing Your Changes 4-23
Bypassing Plug-ins 4-23
V-pot Sensitivity 4-23
Page XVI AWS 924-948 Owner’s Manual
Introduction
To Next Page
Loading...
Need help?
General
