Solid State Logic AWS 948 User Manual

Level Control
T
he 100mm fader at the bottom of the channel strip controls the channel send to the Rec and Mix busses,
as well as any other sends which are operating post-fader.
Note that in DAW focus mode, this function can be assigned to the channel V-pot by pressing the
CHANNEL button in the centre section.
Selected Faders can all be set to 0dB using the Function keys: with none of the upper row of buttons
selected, press the 0dB softkey in the bottom row.
The analogue faders can be automated using SSL’s automation system, or using A-FADA which allows
your DAW automation to control the analogue faders. When in DAW Focus, the fader is used to control
the track fader within the DAW.
See Section 4 for more information on DAW control, and Section 7 for more information on SSL automation
and A-FADA.
924 and 948
AWS 948
The channel fader controls both components of a stereo signal. The relative level of the components (the
balance) can be adjusted using the V-pot.
For In-line Track mode, the main fader controls the secondary channel path (monitor path), and the
V-pot controls the primary channel path. In In-line Mix mode the channel fader controls the primary
path and the V-pot the secondary path. The controls can be flipped between channel paths by pressing
on the V-pot.
Analogue Operations
AWS 924-948 Owner’s Manual Page 3-13

Solid State Logic AWS 948 Specifications

General

Brand	Solid State Logic
Model	AWS 948
Category	Music Mixer
Language	English