3. Edit Tools Menu
Edit Tools (EdTs) displays a list of available tools used by your DAW system. For example, in Pro Tools you can select the
Z
oom, Trim, Select, Grabber, Smart Tool, Scrub and Pencil tools.
4. Edit Modes Menu
Edit Modes (EdMo) displays a list of available edit modes used by your DAW system. Within Pro Tools you can select
Shuffle, Slip, Spot and Grid modes.
5. Status/Group Menu
The Status/Group (StGr) menu contains several useful functions including:
Auto Shows the Automation status of all channel faders on the channel fader scribble strips.
Mon Shows the monitor status of all 24 focused channels on the fader scribble strip. The labelling
is as follows:
Auto Auto input mode
Inpt Input mode only
Aux Auxiliary input channel
MIDI MIDI channel
Mstr Master Fader
Phase Not implemented
Group Shows the grouping status of all 24 focused channels on the console.
Creat To create a fader group for your DAW, select SEL mode on the Master Control Panel then
hold down the SHIFT button and press the SEL buttons on any channels you wish to
group. Finally press the Creat button and a new group will be created.
Suspe Fader/Mix groups can be suspended at any time by selecting Suspe; they are now disengaged
from their respective grouping arrangements. Pressing Suspe a second time re-enables the
groups.
DAW Control
Page 4-26 AWS 924-948 Owner’s Manual
To Next Page
Loading...
Need help?
General
