Editing Plug-In Parameters (Parameter Mode)
Selecting a Plug-In to Edit
I
n Insert or Assign mode press the plug-in V-pot for the insert
you wish to edit or in Insert mode select Parameter mode by
pressing the INSERT/PARAM soft button.
T
o exit from Parameter mode press the PARAM soft key (if
you want to edit a different plug-in) or the ASSIGN soft key
(
if you want to change assignment).
Changing Plug-in Parameters
Once you have selected a channel and a plug-in for editing, the
four V-pots and their switches control the on screen
parameters derived from the DAW plug-in. The names of the
currently selected controls and their values are shown above
the on-screen V-pots.
The PAGE UP and PAGE DOWN buttons can be used to
access all the plug-in controls.
Hi-Resolution Parameter Display Mode
Holding down the OPTION button while editing a plug-in parameter will show a 9-character version of the parameter value
at the top of the Plug-In Editor display.:
The ALT button can be used to open or close the plug-in/pop-up window at any time.
Comparing Your Changes
Pressing the COMPARE button allows you to compare any changes made to plug-in parameters with the values stored
before editing.
As soon as you change any parameter the COMPARE box will turn yellow.
Pressing the COMPARE button toggles between the settings when you starting editing parameters and the current settings.
The plug-in window must be opened before this function becomes available.
Bypassing Plug-ins
The BYPASS button allows a plug-In to be toggled in/out of the signal path in PARAM mode. In INSERT mode,
individual plug-ins can be bypassed by holding down BYPASS and pushing the V-pot that corresponds to the insert you
want to bypass.
The channel SEL switch can be used to bypass all the plug-ins on a channel.
V-pot Sensitivity
The V-pots for the Plug-in Editor can be set to one of two modes: Fixed or Velocity-sensitive. In Fixed mode, turning a knob
will range through the whole list of available parameters. This makes it very quick to search through long lists. Holding
down the ALT button will enable a finer resolution scroll.
In Velocity-sensitive mode the speed of scrolling is dependent upon how quickly you turn the V-pot. To toggle between the
two modes press the F5 button in the Fkys menu.
1
1
2 3 4
2 3 4
DAW Control
AWS 924-948 Owner’s Manual Page 4-23
To Next Page
Loading...
Need help?
General
