SELECTING TR SETUPS
The Sel menu is the main file menu for the Total Recall system.The main window shows a list of stored setups.The setup
w
hich is being displayed has the word ‘selected’ next to it.
Changing the selected setup
The left hand rotary control can be used to scroll through the list of TR setups.A yellow cursor indicates which setup is
currently chosen to be modified.Either the SELECT soft key or the rotary encoder’s push-push switch can be used to select
the highlighted setup for display.The ‘selected’ message will appear next to the setup to indicate that it is being displayed.
Left hand rotary
control scrolls through
the list of setups
selected shows which
setup is currently being
displayed
Yellow cursor indicates
the chosen setup
S
hows function of the
t
op four soft keys
S
hows function of the
lower sixteen soft keys
Press the Sel key or
the rotary control
push-push switch to
choose which Setup is
displayed
Press STORE
key to store a
new Setup
Hold down DELETE
then press CONFIRM
to delete the highlighted
setup
LOAD key for
loading MIDI SysEx
setups from computer
COPY key
selects Channel
Copy mode
Display Select keys
Setup Guide: IO Config
AWS 924-948 Owner’s Manual Page 6-3
To Next Page
Loading...
Need help?
General
