AWS 924-948 Operator’s Manual Page 7-15
Automation
AUTOMATION SETUP OPTIONS
The SSL>MISC>SETUP contains various options for the mix system. Scroll to the option to be edited and select using
t
he Left V-pot push switch. Once the option is active, the left V-pot will increment/decrement a numerical value as it is turned
or page through the various option states. Press the V-pot push switch a second time to complete the setup operation.
Glide Frames Sets the ramp time in frames for Snap mode. The range is from 0 (no glide) to 255
(10 second glide).
Rollback Threshold frames Sets the number of consecutive descending frames that the system needs to see to
determine if a rollback has taken place. The range is 2-10 and the default is 2 frames.
Increase as required if a rollback occurs on stopping the timecode master.
Latched Match & Play Normally Match and Play are automatically deselected after a Cut switch is
operated. This option latches the Match or Play function until deselected manually.
In Mix Show This determines what is displayed on the channels scribble strips when using
automation. Choices are:
• Automation Mode - shows Manual, Safe or Auto
• Channel names in mix running - After pressing Execute will
display channel names
• Channel names - will always display channel names
To Next Page
Loading...
Need help?
General
