Need help?Do you have a question about the Solid DMS-1200 and is the answer not in the manual?
Details the physical and technical specifications of the DMS-1200 server.
Describes the physical layout and ports of the DMS-1200 server's front and rear panels.
Guides users through initial setup and ongoing maintenance tasks for the DMS-1200.
Lists the necessary tools and accessories for installing the DMS-1200 equipment.
Provides step-by-step instructions for physically installing the DMS-1200 server in a rack.
Explains how to physically connect the DMS-1200 server to the DAS using Ethernet cables.
Details the process of connecting multiple BIUs, typically requiring a Gigabit Ethernet switch.
Describes how to establish local or remote connections to the DMS-1200 server.
Guides users through the process of accessing the DMS-1200 via console or remote IP address.
Explains how to register and assign BIUs to the DMS-1200 for management.
Explains how to view the overall status of the DAS, including alarms and connection status.
Describes how to visualize the DAS system hierarchy and alarm status graphically.
Explains how administrators can initiate an emergency shutdown of remote units.
Provides an overview of the menus available on the DMS-1200 navigation bar.
Details how to input and manage site-specific information for the DAS deployment.
Guides users on configuring both external and internal IP addresses for the DMS-1200.
Explains how to set the system time manually or via NTP.
Describes how to configure manual or automatic clearing of alarm and status logs.
Details how to manually delete or set up auto-deletion for trend log data.
Explains how to enable and configure automatic backup routines for device settings.
Provides steps on obtaining and installing software updates for the DMS-1200.
Details how to restart the DMS-1200 server.
Covers the process of adding or removing BIUs from the system for management.
Guides users on configuring Network Operation Center and SNMP settings.
Explains how to configure email alerts for alarm conditions.
Details how to configure the SMTP server settings for sending emails.
Provides instructions for administrators to manage user accounts and their permissions.
Shows how to view a list of users currently logged into the DMS.
Guides users on how to view active alarms and access troubleshooting advice.
Explains how to assign severity levels, customize notifications, and edit alarm descriptions.
Introduces how to access and use device control screens for monitoring and configuring DAS devices.
Covers configuring individual BIUs, MDBUs, VHF/UHF services, and external alarms.
Details monitoring and managing settings for ODUs and Donor Optic Units (DOUs).
Guides on monitoring and managing settings for Optical Expansion Units (OEUs) and DOUs.
Introduces the different types of remote optic units (ROUs) and their setup.
Provides steps for obtaining and updating firmware for DAS components.
Explains how to save and restore DAS operational settings, and download reports.
Describes using the Auto Setup and System Commissioning functions for initial DAS setup.
Explains how to use Auto Setup for levels and values without full system commissioning.
Details how the Power Distribution function calculates and allocates attenuation for equal TX power.
Guides on resetting MDBUs and remote units to their factory default parameters.
Explains how to use the Control > Trend menu to monitor DAS device performance.
Guides on viewing and filtering alarm, control, and security events in the Event Log.
Describes how to view connected DAS network components and download inventory reports.
To Next Page
General