DMS-1200 Release 6 Operations Manual
Section 1 – DMS-1200 Release 6 Overview 9
1.1.1 Standards, Certifications and EMC Approvals
The DMS-1200 server complies with these international standards:
• USA, UL Listed & FCC
• Canada - CUL Mark
• Germany - TUV Certified
• Europe / CE Mark
• EN 60950 / IEC 60950‐Compliant
• CCC Certified
• SNMPv2/v3
1.1.2 Safety Precautions
y SOLiD certified personnel should handle the DMS-1200 and ALLIANCE DAS equipment.
Any person involved in installing or servicing the DAS equipment should understand and follow
these safety guidelines.
• Obey all general and regional safety regulations relating to work on high voltage
installations, as well as regulations covering correct use of tools and personal protective
equipment.
• Use this unit only for the purpose specified by the manufacturer. Do not modify or fit any
spare parts that are not sold or recommended by the manufacturer. This could cause
fires, electric shock or other injuries.
• To prevent electrical shock, switch the main power supply off prior to working with the
DMS-1200. For pluggable equipment, make sure to install the socket outlet near the
equipment so that it is easily accessible.
• Do not use any solvents, chemicals, or cleaning solutions containing alcohol, ammonia,
or abrasives on the DMS-1200 equipment.
FOR EMERGENCY SHUTOFF INSTRUCTIONS SEE PAGE 23.
1.1.3 PC Requirements
To view the DMS-1200 user interface, you can use any standard laptop or desktop computer with
these minimum specifications.
Type Specification
Hardware At least one Ethernet Port. DHCP enabled in network settings.
Software Standard web browser (i.e. Internet Explorer 9 or 10, Chrome, Firefox)
Screen Resolution 1024 x 768 or higher
Table 1.2 – PC Requirements
To Next Page
Loading...