DMS-1200 Release 6 Operations Manual
Section 8 – System Commissioning with EasySet 86
8 System Commissioning with EasySet
EasySet is SOLiD’s quick commissioning solution that supports these functions:
• Auto Setup –set up all automatic functions (i.e., Auto Level Control, Auto Gain Control,
Auto Gain Setting) at one time from a single screen.
• System Commissioning – automatically optimize output power levels and optical
attenuation according to the settings made in Auto Setup.
• Power Distribution – calculate and set attenuation levels so that the same power levels
are allocated to each band.
• Restore Factory Defaults – restore all DAS operating parameters to factory defaults.
All these functions are executed per BIU and affect all components associated with that BIU.
These functions are available to the technician both onsite and through remote connection to the
DMS-1200.
In This Section
Running Auto Setup
Commissioning the System
Calculating Power Distribution
Restoring Factory Defaults
Related Topics
Configure Individual Parameters: Use the DAS device control configuration screens available
from the Control > Command menu to set individual parameters for select DAS components
To Next Page
Loading...