DMS-1200 Release 6 Operations Manual
Section 3 – Login and BIU Assignment 16
3 Login and BIU Assignment
You can log in to the DMS-1200 either while onsite or from an offsite location like a Network
Operations Center (NOC).
Before you can use the DMS-1200 to manage the DAS, you will need to register or “assign” each
BIU in the system. This is a one-time setup process and is not required each time you log in to
the BIU. This section provides instructions on how to assign BIUs and how to use the DMS-1200
menus and navigation features.
In This Section
Logging in
Assigning BIUs
Viewing Remote Access Settings
Using the Main Screen
System Status
System Topology View
Navigation Bar Menus
To Next Page
Loading...