DMS-1200 Release 6 Operations Manual
Section 4 – DMS-1200 Setup 30
4.4 Managing the Event Log
Using the Event Log settings, you can define how often the alarm and status logs are cleared.
The DMS-1200 offers manual and auto modes.
1. On the Network menu, click System.
2. Edit the Event Log settings according to the following guidelines:
Option Action / Status
Delete All Logs
Click Delete All logs, to delete ALL the alarm and status events
immediately. All records are removed from the Event Log database.
Deleted log data cannot be restored.
Manually Deleting Logs
To delete logs just between a specific date/time range, enter this
range in the Manually Deleting Logs fields, then click Delete.
Auto Delete
To delete all logs automatically at a defined time interval (specified
in Retention Period), turn On Auto Delete.
Retention Period
If using Auto Delete, enter the number of days (up to 500) to retain
logs. This feature only applies to Auto Delete. If logs are not
deleted manually or automatically, they are saved indefinitely.
Table 4.4 – Event Log Setup
3. Click Apply to save the settings. Changes are applied immediately.
To Next Page
Loading...