DMS-1200 Release 6 Operations Manual
Section 1 – DMS-1200 Release 6 Overview 6
1 DMS-1200 Release 6 Overview
The DMS-1200 REL6 is a DAS management system that provides an alarming, diagnostic, and
control interface for one or more SOLiD ALLIANCE DAS platforms.
The DMS-1200 provides these management functions for the DAS network:
• Centralized management for devices and auto discovery of the DAS network topology
• Web-based management over HTTP/HTTPS
• Simplified commissioning using EasySet and auto Power Distribution
• Configurable SNMP v2/v3 traps sent to the NOC
• Support for private enterprise management information base (MIB) files provided for
SNMP traps
• Configurable IP settings for DMS and designated NOC(s)
• Auto assign BIU’s IP addresses
• Alarm masking to hide unused alarms from being reported
• Alarm Control with hysteresis and alert level, color, remedy
• Active alarms collection and real-time alarm monitoring
• Alarm notification through email
• DMS-1200 system upgrades via the web or USB flash
• Firmware upgrade for all devices from DMS
• Custom filtering and data export for inventory reports, alarm logs, event logs, trend logs
• Historical trend and graph for devices
• Management of up to 20 BIU units (connecting multiple BIUs requires a Gigabit Ethernet
switch)
• Automatic and manual backup and for restoring device parameters
• Emergency shut down of all remote units
In This Section
DMS-1200 Specifications
DMS-1200 Front / Rear Panel
Quick Start
To Next Page
Loading...