Chapter 11 DME Operations
14
Three-Dimensional Transformation Operations
Device control block (MKS-8031TB)
Transforming an image in three-dimensional coordinate space
For details of three-dimensional DME coordinate space, see “Three-
Dimensional Transformations” in Chapter 1 (Volume 1).
Use the following procedure.
1
With the region selection buttons, select the target channel of the
operation.
You can press several of the buttons simultaneously to select several
channels. In this case, the button that you pressed first lights in green,
while buttons pressed subsequently light in amber.
2
With the function assignment buttons, select the three-dimensional
coordinate space in which to perform the transformation.
LOCAL button: Selects local coordinate space.
GLB button: Selects global coordinate space. You can select this button
and the [LOCAL] button simultaneously.
SRC button: Selects the source coordinate space.
DEVUSER
M/E1
DME1
DME5
MENU
SHIFT
M/E2
DME2
DME6
ASP
PERS
SUB
LOC
SIZE
FMR1
AXIS
LOC
MAIN
LOCAL
K1
CB1
GLB
K2
CB2
CLR
WORK
BUFR
M/E3
DME3
DME7
SRC
K3
FM1
TRGT
K4
FM2
LOC
XYZ
FMR2
X
P/P
DME4
DME8
ROT
POS
Y
Z CTR
RUN
CTRL
Function assignment buttons
Operating buttons
Z-ring
Region selection buttons (DME1 to 4)
Trackball
To Next Page
Loading...
