Sony DVS-9000SF - Mirror Settings

79DME Special Effect Operations
Chapter 11 DME Operations
To set the partition position
Use the following procedure.
1 Press [Position], turning it on.
2 Set the following parameters.
Mirror settings
The Mirror effect partitions the image vertically and horizontally, creating an
image like a reflection in a mirror.
To apply the Mirror effect
With the Mirror menu displayed, press [Left to Right], [Right to Left], [Top to
Bottom], or [Bottom to Top] to set the reflection method (multiple selections
possible).
Left to Right: Reflect left side on right.
Right to Left: Reflect right side on left.
Top to Bottom: Reflect top side on bottom.
Bottom to Top: Reflect bottom side on top.
Parameter group [2/2]
Knob Parameter Adjustment Setting values
1 Transition V Degree of transition in vertical
direction
0.000 to 100.000
2 Random V Degree of randomness in distance
moved by blocks in vertical direction
0.00 to 100.00
3 Skew V Degree of skew in vertical direction 0.00 to 100.00
4 Width V Vertical width of partition 0.00 to 100.00
5 Angle Angle of partition line –8.000 to +8.000
Knob Parameter Adjustment Setting values
1 H Horizontal partition position –5.000 to +5.000
2 V Vertical partition position
–5.000 to +5.000
SONY
DME
SO
DM
SO
D
SO SO
SO SO
Left to Right
Top to
Bottom