Chapter 11 DME Operations
94
DME Special Effect Operations
3
When you select Normal or Mat in step 1, press [Bar Diffuse Color],
turning it on, and adjust the following parameters to set the color of the
diffuse light area.
Trail Settings
This effect recursively freezes the input video at regular intervals so that a trail
of afterimages is created.
Knob Parameter Adjustment Setting values
1 Luminance Luminance 0.00 to 100.00
2 Saturation Saturation 0.00 to 100.00
3 Hue Hue 359.99 to 0.00
With no selection made in
the <Bar Light Mode>
group
Width
Bar Light
With a selection made in
the <Bar Light Mode>
group
Diffuse Light
Diffuse Light
Bar Light
Offset = 0
To Next Page
Loading...
