Chapter 11 DME Operations
50
DME Special Effect Operations
2
Press [Poster/Solar], turning it on.
The Posterization and Solarization effects are enabled. You can adjust the
coarseness of the gradations with the knobs.
3
Set the parameters.
Masking the Posterization or Solarization effect with a selected
pattern
Press [Mask] to display the Mask menu, and set the pattern type and modifiers.
For details, see “Mask Settings” (page 59).
Nega Settings
This effect reverses the luminance or chroma of the image.
For an illustrative figure and other information, see “DME Special Effects” in
Chapter 1 (Volume 1).
Applying the Nega effect
Use the following procedure.
1
In the DME menu, select VF2 ‘Video Modify’ and HF3 ‘Color Modify.’
The Color Modify menu appears.
2
Press [Nega Y] or [Nega C], turning it on, or press both buttons, turning
them on.
Nega Y: Reverse the luminance.
Nega C: Reverse the chroma.
Masking the Nega effect with a selected pattern
Press [Mask] to display the Mask menu, and set the pattern type and modifiers.
Knob Parameter Adjustment Setting values
1 Poster Coarseness of luminance
gradations (Posterization
parameter)
0.00 to 100.00
2 Solar Coarseness of chroma
gradations (Solarization
parameter)
0.00 to 100.00
To Next Page
Loading...
