Sony DVS-9000SF - DIM and Fade Settings

Chapter 11 DME Operations
56
DME Special Effect Operations
1 In the DME menu, select VF7 ‘Enhanced Video Modify’ and HF2 ‘Metal.’
The Metal menu appears.
2 Press [Metal], turning it on.
This enables the Metal effect.
3 Set the parameters.
4 In the <Metal Mode> group, select the type of metallic gloss.
Gold: Give a gold gloss to the input video.
Silver: Give a silver gloss to the input video.
Rainbow: Give a rainbow color gloss to the input video.
Variable: Give a metallic gloss to the input video in any color by adjusting
the following parameters.
Masking the Metal effect with a selected pattern
Press [Mask] to display the Mask menu and set the type of pattern and
modifiers.
For details, see “Mask Settings” (page 59).
Dim and Fade Settings
The Dim effect makes the image darker as it recedes into the distance. The
Fade effect makes the image fade into the background as it recedes into the
distance.
For sample illustrations and other information, see “Digital Multi Effects
(DME)” in Chapter 1 (Volume 1).
Knob Parameter Adjustment Setting values
1 Mix Ratio Mix amount for Metal video and
input video
0.00 to 100.00
2 Y Clip Clip level of input signal Y level 0.00 to 100.00
3 Y Gain Amount of gain for clip adjusted
input signal Y level
–100.00 to +100.00
4 Y Offset Offset added to clip and gain
adjusted input Y signal
0.00 to 100.00
Knob Parameter Adjustment Setting values
2 Saturation Saturation 0.00 to 100.00
3 Hue Hue 359.99 to 0.00