Chapter 11 DME Operations
58
DME Special Effect Operations
Glow Settings
This effect softens the edges of highlights, giving an effect like being struck by
a soft light.
For a sample illustration and other information, see “Digital Multi Effects
(DME)” in Chapter 1 (Volume 1).
Applying the Glow effect
Use the following procedure.
1
In the DME menu, select VF7 ‘Enhanced Video Modify’ and HF4 ‘Glow.’
The Glow menu appears.
2
Press [Glow], turning it on.
This enables the Glow effect.
Note
When Glow is enabled, the key border function (see page 30) cannot be
enabled.
3
Set the parameters.
4
Press [Matte] and set the glow color.
Inverting the highlight areas
Press [Glow Invert], turning it on.
The highlight and non-highlight areas are inverted.
Knob Parameter Adjustment Setting values
1 Clip Reference level for highlight
detection
0.00 to 100.00
2 Gain Amount of gain for highlights –100.00 to +100.00
3 Soft Softness 0.00 to 100.00
Knob Parameter Adjustment Setting values
1 Luminance Luminance 0.00 to 100.00
2 Saturation Saturation 0.00 to 100.00
3 Hue Hue 359.99 to 0.00
To Next Page
Loading...
