Chapter 19 Color Corrector
392
Color Corrector Functions
Color Corrector Functions
This section describes the color corrector functions.
Input Video Processing Operations
To apply input video processing effects, use the following procedure.
1
In the CCR menu, press VF1 ‘CCR1’ and HF1 ‘Input Process.’
The Input Process menu appears.
2
In the <Input Process> group, press [Input Process], turning it on.
3
Adjust the following parameters.
To return the parameters to their default settings
Press [Unity] in the <Input Process> group.
Primary Color Correction Operations
Applying primary color correction
Use the following procedure.
1
In the CCR menu, press VF1 ‘CCR1’ and HF2 ‘Primary CCR.’
The Primary CCR menu appears.
2
In the <Primary CCR> group, press [Primary CCR], turning it on.
Knob Parameter Adjustment Setting values
1 Video Gain Video signal gain –200.00 to +200.00
2 Y Gain Y signal gain –200.00 to +200.00
3 C Gain Chrominance signal gain –200.00 to +200.00
4 Hue Delay Hue delay –180.00 to +180.00
5 Black Level Black level –116.90 to +116.90
To Next Page
Loading...
