Sony DVS-9000SF - File Name; Saving and Recalling a File

Appendix
442
Macro File Editing Rules
File Name
Set the file name as follows.
Example: nnnnnnnn.PNL_rrrr.PMR
nnnnnnnn: In a file created on the switcher, this is a register name
automatically set by the switcher.
The name is limited to eight characters.
The following characters may not be used.
space, \, /, :, ;, , (comma), . (dot), <, >, *, ?, “ ”
rrrr: macro register number (0001 - 0099)
Saving and Recalling a File
For a newly created file, if you create a directory on the memory card (see
figure below), and move the file to the prescribed location, you can then recall
it in the File>All, External File menu.
Note
When amending a file saved on the switcher, be sure to save it in the original
directory.
Path example: Memory Card\Sample\MACRO\CTRLCPU\
nnnnnnnn.PNL_rrrr.PMR
Memory card Any directory
MACRO
CTRLCPU
nnnnnnnn.PNL_rrrr.PMR