55DME Special Effect Operations
Chapter 11 DME Operations
• To set the color of the sections other than the outlines for Draw
Press [Matte], turning it on, and adjust the following parameters to set the
color of the sections other than the outlines.
• To select the signal to mix with the relief pattern for Relief
In the <Chroma Type> group, select the signal to mix with the relief
pattern.
Matte: Select a single color. The following parameters can be adjusted.
Video: Select the input video signal.
6
To invert white and black in the extracted video, or to invert the outlines
and the sections other than the outlines, press [Nega], turning it on.
Masking the Sketch effect with a selected pattern
Press [Mask] to display the Mask menu and set the type of pattern and
modifiers.
For details, see “Mask Settings” (page 59).
Metal Settings
This effect provides a metallic gloss like that from gold, silver, or a rainbow
colored surface.
For a sample illustration and other information, see “Digital Multi Effects
(DME)” in Chapter 1 (Volume 1).
Applying the Metal effect
Use the following procedure.
2 Saturation Saturation 0.00 to 100.00
3 Hue Hue 359.99 to 0.00
Knob Parameter Adjustment Setting values
Knob Parameter Adjustment Setting values
1 Luminance Luminance 0.00 to 100.00
2 Saturation Saturation 0.00 to 100.00
3 Hue Hue 359.99 to 0.00
Knob Parameter Adjustment Setting values
2 Saturation Saturation 0.00 to 100.00
3 Hue Hue 359.99 to 0.00
To Next Page
Loading...
