Sony DVS-9000SF - Page 93

93DME Special Effect Operations
Chapter 11 DME Operations
Setting the color of the shade in the shade area
To set the color of the shade in the shade area, use the following procedure.
1 Turn [Shade Color] on.
2 Adjust the following parameters.
Setting the bar mode of the highlight area
When you select [Bar] in step 3 of “Applying the Lighting effect” (see page
90), use the following procedure to set the bar mode of the highlight area.
For a sample illustration and other information, see “Digital Multi Effects
(DME)” in Chapter 1 (Volume 1).
1 Select the mode in the <Bar Light Mode> group.
Normal: Emphasizes the bar highlight area.
Specular: An effect like light striking a surface with metallic reflections.
Mat: An effect like light striking paper, cloth, or another diffusively
reflective surface.
2 Set the following parameters.
Knob Parameter Adjustment Setting values
1 X X-value of bar center point –4.00 to +4.00
4 Width Width of bar 0.00 to 100.00
5 Soft Softness of edges 0.00 to 100.00
Knob Parameter Adjustment Setting values
1 Luminance Luminance 0.00 to 100.00
2 Saturation Saturation 0.00 to 100.00
3 Hue Hue 359.99 to 0.00
Knob Parameter Adjustment Setting values
1 Intensity Intensity of diffuse light area 0.00 to 100.00
2 Offset Offset of center of diffuse light
area
–4.00 to +4.00
3 Width Width of diffuse light area 0.00 to 100.00
4 Soft Softness of diffuse light area 0.00 to 100.00